Hợp kim thép ống liền mạch

20MnCr5 Cold Drawn Seamless Tubes Normalized Condition Products Description: 20MnCr5|1.7147 properties is a chromium, manganese, titanium alloy steel specification. 20MnCr5|1.7147 is equivalent with others standard Carburizing steel, gearing steel. Related Specifications ASTM A29/A29M DIN EN 10083/3 JIS G4053 DIN DIN/T DIN17210 Heat treatment Related Annealing of 16MnCr5|1.7147 Alloy gearing steel Slowly heated to 790-810 ℃ and allow enough times, let the steel to be

JIS G3462 STBA12 Alloy Boiler Steel Tubes STBA12, STBA13, STBA20 etc. Size Range: OD: 3.2-76.2mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Preformance and Longer Working Life Applications: This standard tubes are used for exchanging heat between the inside and outside of the tubes, such as water tubes, smoke tubes, superheater tubes of boilers, and heat exchanger tubes, condenser tubes and catalyst tubes used in chemical and

Product Name: ASTM A519 4130 Seamless Mechanical Alloy Steel Tube High Strength Alloy Steel Tubes SAE4130 SAE4140 Size Range: OD: 6-256mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: HR, CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat

40Cr / 5140 Cold Rolled Tempering Alloy Steel Tube for Automotive Parts Material: 40Cr / 41Cr4 / 5140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Application: Mainly used for automotive parts such as gear, bushing and transmission shaft, etc. 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product Name 40Cr / 41Cr4 / 5140 Temperaing Alloy Steel Tube Material 40Cr / 41Cr4 / 5140 Delivery

GOST550-75 10Г2 15Х5М 15X5 25x2 20x2 25x2.5 GOST550 10Mn2 15Cr5Mo 15Cr5 Seamless Steel Tubes for Petrochemical Industry Application:seamless steel tubes for petroleum refining tubes application Normal sizes:25x2.5mm 25x2mm 20x2mm Механические свойства 10Г2 15Х5М 15X5 марка стали Steel grade Времен. сопрот., Tensile Н/мм2 Предел текуч., Yield Н/мм2 Относит. удлин., Elongation % Относит. сужение, reduction % Ударная вязкость Impact KCU, Дж/см2 Твердость по Бринеллю, Hardness НВ

8620H carburizing Alloy steel mechanical tubing anti-friction seamless cold drawn bearing steel pipes Products Description: 8620H properties is a carburing alloy steel specification as ASTM A534 Other Related Specifications ASTM A295/A295M DIN EN 10083/3 JIS G4053 DIN17210 Chemical compostion Carbon C: 0.17-0.23 (allowable deviation: ± 0.02) Silicon Si: 0.15 ～ 0.35 (allowable deviation: ± 0.03) Mn: 0.60-0.95 (allowable deviation: ± 0.04) Sulfur s: ≤ 0.015 (allowable deviation

20CrNiMoH/8620H carburizing Alloy steel tube by cold drawn and cold rolled process for anti-friction bearing Products Description: 20CrNiMoH/8620H properties is a carburing alloy steel specification as ASTM A534/GB3077 Other Related Specifications ASTM A295/A295M DIN EN 10083/3 JIS G4053 DIN17210 Chemical compostion Mass fraction (%): Carbon C: 0.17-0.23 Si: 0.17-0.37 Mn: 0.60-0.95 Sulfur s: allowable residual content ≤ 0.035 P: allowable residual content ≤ 0.035 Cr: 0.40-0

SAE4130 SAE1541 Alloy steel seamless pipes for mechanical and rock drilling well 1. Product Name: Seamless Steel Tubing wire-line drill rods 2. Size Range: AQ,BQ,NQ,HQ,PQ Length:3m,3.06m 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Protective Atmosphere Heat Treatment, Surface is clean and smooth, without oxide scale 5. Good Extending and Bending Ability, Longer Work Life Product Name Seamless Steel Tubing wire-line drill rods Material XJY750 XJY850

JIS SCM415 SCM430 SCM435 SCM440 Cr-Mo Steel Tube For Mechanical and rubber parts application Material:SCM415 SCM430 SCM435 SCM440 Size Range: OD: 6-114.3mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection