Tìm thấy 29 sản phẩm cho "

weldable steel pipe

Ống thép hàn có dầu Thép cacbon / Thép mangan cacbon Astm A178

ASTM A178 Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Steel Tube Application:boiler tubes,boiler flues,superheater flues and safe ends. Size:L--4~12m OD--12.7-127mm WT--0.9-9.1mm Grade:Type A,C and D Manufacture :electric-resistance welding. Heat Treatment:After welding,all tubes shall be heat treated at a temperature of 1650°F[900℃]or higher and followed by cooling in air or in the cooling chamber of a controlled-atmosphere

Kháng điện Ống thép hàn 6 - 108mm Kích thước OD Độ bền kéo cao cho ô tô

JIS G3472 STAM290GA STAM390G Electric resistance welded carbon steel tubes for automobile This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes designed to be used for automobiles (hereafter referred to as tubes). This Standard is generally applicable to the tubes in the range of 15.9 mm to 101.6 mm in outside diameter. Manufacturing method The manufacturing method shall be as follows. a) The tube shall be manufactured from hot rolled

Lò hơi Mangan Ống thép hàn cho bộ quá nhiệt 0.9 - 9.1mm Kích thước WT

1. Product Name: ASTM A178 Electric Resistance Welded Carbon Steel and Manganese Steel Boiler and Superheater Tubes 2. Size Range: OD: 12.7-127mm, WT: 0.9-9.1mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Preformance and Longer Working Life Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line

Q195 Ống thép cơ khí Erw hàn để phân phối chất lỏng áp suất thấp GB / T3091

GB/T3091 Q195 ERW Welded Steel Pipes For Low Pressure Liquid Delivery Welded Steel Pipes Weled steel pipes for low pressure liquid delivery is also called general welded pipe, commonly known as the clarinet. It is used to transport oil, gas, air, water and heating steam and other general low pressure fluid and other purposes of welded steel pipe.Steel tube is divided into ordinary steel pipe and increasing pipe according towall thickness ;According to side form,it is divided

RSt37 - 2 Ống tròn hàn chính xác, Ống hàn Erw DIN 2393 với độ đồng tâm đồng nhất

1. Product Name: DIN2393 RSt37-2 St42-2 St52-3 Precision Welded Steel Pipe for with Uniform Concentricity2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m3. Stable Quality with Comeptitive Price4. Good Extending and Bending Ability Product NameDIN2393 Precision Welded Cold Drawn Steel PipeMaterialRSt34-2, RSt37-2, St44-2, St52-3Delivery ConditionBK, BKW, BKS, GBK, NBKStandardDIN2393Size RangeOD: 6-88mm, WT: 1-10mmApplicationHigh precision purpose, auto

Ống thép liền mạch 40Cr / 41Cr4 / 5140, Phụ tùng ô tô Ống thép hàn

Product Name: 40Cr / 41Cr4 / 5140 Seamless Cold Rolled Steel Tube for Automotive Parts Material: 40Cr / 41Cr4 / 5140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5.

Ống thép chịu lực AISI 8620

AISI 8620 alloy Steel with Quenched and Tempered process cold drawn and cold rolled seamless tubes for rod and shaft Products Description: AISI 8620 alloy Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality low carbon,Low alloy chromium, molybdenum, nickel case hardening steel. Oil Quenched & Tempered Hardenss is 28-34 HRc. AISI 8620 steel Annealing delivery hardenss less than 250HB. AISI 8620 Alloy structural steel properties

ASTM A519 Ống thép hợp kim liền mạch

Ống thép phần rỗng cán nóng, Ống vuông kết cấu tường nặng S275NH Lớp

EN10210-1 S275NH S355NH hot rolled seamless heavy wall hollow section steel tube , hollow bars DIN EN 10210-1 Hot finished Heavy Wall Steel Tubing of non-alloy and fine grain steels DIN EN 10210-1 Hot finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions Part 2: Tolerances, dimensions and sectional properties Cold forming: Process is done at ambient temperature Structrual hollow section manufacturing process: Structural

trang 3 của 4