round mechanical tubing
"
Cấu trúc ống kim loại Dom, Giá đỡ động cơ Ống thép tròn 1 inch
Product Name: Mechanical Cold Drawn Welded DOM Steel Tubing ASTM A513 Type5 with the Internal Weld Seam Removed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM Steel Tubing, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface. DOM round steel tube has been drawn over a mandrel to produce a tube having more exact dimensional accuracy and tolerances, and a very smooth insde and outside finish. DOM steel
ASTM / A513 Dom Ống thép 6 - 168mm Kích thước OD 1 - 15mm Kích thước WT cho ống lót
Product Name: ASTM A513 Type5 1020 Mechanical Grade , DOM Round Steel Tube Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM Steel Tubing, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface. DOM round steel tube has been drawn over a mandrel to produce a tube having more exact dimensional accuracy and tolerances, and a very smooth insde and outside finish. DOM steel tubing is ideal for more stressful
Độ bền tốt Ống thép hợp kim liền mạch Ống thép tròn Độ bền tuyệt vời
30ХГСА 30HGSA 30CrMnSiA Alloy Steel tubes steel pipes for oil and gas and geological drill pipes Application:seamless steel tubes for oil and gas and geological drill rods application 30ХГСА 30HGSA 30CrMnSiA Chemical composition, % C Si Mn Ni S P Cr Cu 0.28 - 0.34 0.9 - 1.2 0.8 – 1.1 Up to 0.3 Up to 0.025 Up to 0.025 0.8 - 1.1 Up to 0.3 Temperature of 30HGSA material critical points. Ac1 = 760 , Ac3(Acm) = 830 , Ar3(Arcm) = 705 , Ar1 = 670 , Mn = 352 Mechanical properties, Т
Que khoan dầu Hợp kim Ống thép liền mạch Ống thép tròn Độ bền cao
73x8.5 83x9 38Cr2MoAlA 38CrMoAl 38H2MUA 38X2МЮА Alloy steel seamless pipes for oil drill rods. Additional technical requirements for steel grade 38H2MUA pipes Asortment: -ID 28mm, WT 1,2 mm - ID З Зmm., WT 1,Зmm - ID 39,4mm, WT 1,3 mm - ID 45,4mm, WT 1,3 mm GOST 8734-75 3750mm Curvature shouldn’t exceed 1mm for 1m Mechanical properties, heat treatment should correspond to GOST 8734-75, 8733-74, group V Chemical composition, % С Мп Мо Р S Si Сг Аl GOST 4543-75 0,35±0.01 0.30±0
Ống thép Dom chính xác OD nhỏ Loại ASTM / A513 với bề mặt sạch
Product Name: Small OD Precision DOM Steel Tubing ASTM A513 Type5 1020 1026 4130 with Clean surface Application: For auto parts, machinery, mechanical engineer Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and
Ống thép tròn kết cấu 1 - 20mm, Ống thép cán nguội cơ khí
Russian Steel Standard GOST8734 Seamless Cold Drawn Stee Tube for mechanical and structural purpose Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to
Ống thép hợp kim cơ khí, 4130/4140 Ống thép tròn 1 - 15mm
Product Name: 4130 / 4140 Seamless Alloy Steel Tube , Mechanical Alloy Steel Tubing with high strength Material:1010, 1020, 4130 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Stable Quality with Comeptitive Price. +SR Heat Treatment, Strength Relief heat treatment. Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating
Ống thép đúc nguội liền mạch bền Ống thép tròn 1 - 20mm Kích thước WT
GOST8734/GOST8733 Seamless cold deformed Steel Tube by size 25x2mm 25x2.5mm 20x2mm 20x2.5mm Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 12meters This standard is applied to seamless cold and warm deformed steel pipes of general purpose of carbon and alloy steel. Pipes are to produce in accordance with requirements of present standard conforming with technological process in accordance with
Ống thép tròn đúc nguội SMLS Loại 6 - 420Mm Đường kính ngoài Thiết kế tùy chỉnh
Cold drawn aisi 4130 alloy steel tubes and pipes Alloy steel 4130 4140 for ASTM A519 seamless steel tubes ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% cold drawn aisi 4130 alloy steel tubes and pipes SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15
